The links at the bottom of this page will show you our posts that explain the of interior preparation. They tell you how to repair the most common surfaces flaws and also describe how to clean surfaces before painting.
As an example, if you are painting over a previously painted surface, look for chipped peeling, or rough areas.
Best way to find flaws starts removing all around painting working areas. If this is not possible, get them in one central area, and cover it and the floors with drop cloths.
Loosen the light fixtures, let them hang and wrap them with plastic, take down curtains and draperies, remove the wall plates from outlets and switches (if you intend to paint them the same color as the wall, do so while they’re off the wall).
Fixing Popped Nails
Nails can come loose or rust. Put them back in their place by following these instructions.
Fixing Small Drywall Holes
You want a clean, smooth surface before you begin painting drywall. Use these steps to fill in old holes.
Fixing Large Drywall Holes
Some holes are large enough that you will need to replace a whole section of drywall. That’s an easy project with these steps.
Fixing Cracked Plaster
Paint will not cover up a crack in the plaster for long. Fix this problem for longer, and guarantee yourself a smooth, solid surface to be painted.
Washing and Sanding Surfaces
Wash ans scrub old stains, odors like smoke places, and dirt before your preparation. Learn the best way to clean up your surface before your painting project begins.
Scrape Surfaces
Old paint layers may create defective surfaces. See the right way for scraping down to the original material.
Masking Surfaces
The use of masking tape will protect that paint goes only where supposed to, and not where it is not. Read about making masking tape work for you.